APC Rack PDU, 2G, metered by outlet, with switching, 0U, 30A, 200V and 208V, 21 C13 and 3 C19 sockets

• Number Of Cables: 1
• Cable Length: 9.84 ft
• Main Input Voltage: 200 V || 208 V || 230 V
• Number Of Rack Unit: 0U
• Provided Equipment: CAN Port Terminator || Installation guide || Rack Mounting brackets || Safety guide || Serial configuration cable

Contractual warranty

• Warranty: 2 years repair or replace

Environmental

• Storage Relative Humidity: 5-95 %
• Ambient Air Temperature For Operation: -5-60 °C
• Storage Altitude: 0-50000 ft
• Ambient Air Temperature For Storage: -25-65 °C
• Relative Humidity: 5-95 %
• Operating Altitude: 0...10000 ft

Physical

• Height: 182.9 cm
• Usb Compatible: No
• Net Weight: 8.23 kg
• Mounting Location: side
• Mounting Mode: rack-mounted
• Color: Black
• Mounting Position: vertical
• Width: 5.6 cm
• Depth: 5.1 cm

Offer Sustainability

• Rohs Exemption Information: Yes
• Mercury Free: Yes
• Environmental Disclosure: ENVPEP1612033_EN
• Sustainable Offer Status: Green Premium product
• Take-Back: Take-back program available
• Lead Free: Yes
• Reach Regulation: Reference contains Substances of Very High Concern above the threshold
• Optimized Energy Efficiency: Energy efficient product
• Circularity Profile: ENVEOLI1612033_EN
• Eu Rohs Directive: Compliant

Input

• Input Frequency: 50/60 Hz
• Line Rated Current: 24 A

Overview

• Lead Time: Usually in Stock
• Presentation: APC Metered by Outlet with Switching Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and individual outlet power metering. Remote outlet level controls allow power on/off functionality for power recycling to reboot locked-up equipment and to avoid unauthorized use of individual outlets. Power sequencing delays allow users to define the order in which to power up or down attached equipment. Avoid circuit overload during power recovery and extend uptime of critical equipment by prioritizing the load shedding. Current metering provides real-time remote monitoring of connected loads. Switched Rack PDUs include real power monitoring, a temperature/humidity sensor port, and locking IEC receptacles. User-defined alarms warn of potential circuit overloads before critical IT failures occur. Users can access, configure, and control Switched rack PDUs through secure Web, SNMP, or Telnet Interfaces and is complimented by APC Centralized Management platforms using InfraStruxure Central, Capacity Manager and Change Manager.

Conformance

• Product Certifications: cUL Listed || PSE || UL Listed || VCCI Class A
• Standards: FCC Part 15 class A || ICES-003

User guide

Instruction sheet

Firmware

Technical Drawing

Certificate

System user guide

Catalog

CAD

Specification guide

Environmental Disclosure

Quick start guide