Product Description
- Range Of Product: Harmony ST6
- Product Or Component Type: touch panel screen
- Processor Name: ARM Cortex-A8
Complementary
- Product Brand: Schneider Electric Modicon || Mitsubishi Melsec || Omron Sysmac || Rockwell Automation Allen-Bradley || Siemens Simatic
- [Us] Rated Supply Voltage: 24 V DC +/- 20 %)
- Number Of Pages: 200 application pages
- Brightness: 16 levels
- Height: 108.2 mm
- Inrush Current: 30 A
- Power Consumption In W: 7.8 W
- Cut-Out Dimensions: Ø 22.5 mm
- Display Resolution: 480 x 272 pixels
- Processor Frequency: 800 MHz
- Net Weight: 0.49 kg
- Fixing Mode: Ø 22 mm hole 1.5 to 6 mm thick panel UL 61010-2-201 || Ø 22 mm hole EN 61131-2 || Ø 22 mm hole IEC 61000-6-2
- Backlight Lifespan: 20000 hours white
- Touch Panel: single touch analogue resistive
- Local Signalling: status LED green, steady offline || status LED green, steady operating || status LED green, flashing operating || status LED green, faded stand-by || status LED orange, flashing software starting up || status LED red, steady power supply (ON) || status LED red, flashing operating || status LED red, off power supply (OFF)
- Integrated Connection Type: 1 COM1 serial link - female RJ45 - RS232C/RS485 2400...115200 bps) || 1 USB 2.0 type A || 1 USB 2.0 type micro B || 2 Ethernet - female RJ45 - 10/100BASE-T
- Display Size: 4 inch
- Downloadable Protocols: Modbus || Uni-TE || third party protocols
- Enclosure Material: PC
- Display Colour: 16 million colours
- Width: 145.6 mm
- Display Type: colour TFT LCD
- Front Material: plastic
- Realtime Clock: built-in 0...50 °C || built-in 10...90 % RH
- Depth: 53.9 mm
- Character Font: ASCII || ASCII (European characters) || Chinese (simplified Chinese) || Japanese (ANK, Kanji) || Katakana || Korean || Taiwanese (traditional Chinese)
- Memory Description: 1 GB device memory || 128 MB user data memory || 512 kB backup memory
Offer Sustainability
- Rohs Exemption Information: Yes
- Mercury Free: Yes
- Environmental Disclosure: ENVPEP2007003EN
- Sustainable Offer Status: Green Premium product
- Reach Regulation: Reference contains Substances of Very High Concern above the threshold
- California Proposition 65: WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Weee: The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- China Rohs Regulation: X
- Circularity Profile: ENVEOLI2007003EN
- Eu Rohs Directive: Pro-active compliance (Product out of EU RoHS legal scope)
Environment
- Product Certifications: CE || UKCA || cULus || RCM || KC || cULus Class 1 Division 2 || ABS || RINA || DNV
- Ambient Air Temperature For Operation: 0-50 °C
- Standards: EN 61000-6-4 || EN 61000-6-2 || EN 61131-2 || UL 61010-2-201 || CSA C22.2 No 61010-2-201 || CSA C22.2 No 213
- Immunity To Microbreaks: 2 ms
- Electromagnetic Compatibility: electrical fast transient/burst immunity test 2 kV power ports) IEC 61000-4-4 || electrical fast transient/burst immunity test 1 kV signal ports) || electrostatic discharge immunity test 6 kV contact discharge) EN/IEC 61000-4-2 level 3 || electrostatic discharge immunity test 8 kV air discharge)
- Vibration Resistance: +/- 3.5 mm 5-9 Hz) X, Y, Z directions for 10 cycles (approx. 100 min) EN/IEC 61131-2 || 9.8 m/s² 9-150 Hz)
- Shock Resistance: 147 m/s² 11 ms X, Y, Z directions for 10 cycles (approx. 100 min))EN/IEC 61131-2
- Ip Degree Of Protection: IP20 IEC 61131-2 rear panel) || IP65 IEC 61131-2 front panel)
- Directives: 2014/35/EU - low voltage directive || 2014/30/EU - electromagnetic compatibility
- Ambient Air Temperature For Storage: -20-60 °C
- Nema Degree Of Protection: NEMA 4 front panel (indoor use) || NEMA 13 front panel (in enclosure)
- Relative Humidity: 10-90 % non-condensing
- Operating Altitude: 6561.68 ft (2000 m)
Spec Sheet
Harmony STM6 -SE 4.3 full module - 3D CAD - MCADID0004925_2D-bottom (dxf)
Harmony STM6 -SE 4.3 full module - 3D CAD - MCADID0004925_2D-bottom (dwg)
Harmony STM6 -SE 4.3 full module - 3D CAD - MCADID0004925_2D-right (dwg)
Harmony STM6 -SE 4.3 full module - 3D CAD - MCADID0004925_2D-right (dxf)
Harmony STM6 -SE 4.3 full module - 3D CAD - MCADID0004925_2D-top (dwg)
Harmony STM6 -SE 4.3 full module - 3D CAD - MCADID0004925_2D-back (dwg)
Harmony STM6 -SE 4.3 full module - 3D CAD - MCADID0004925_2D-front (dwg)
Harmony STM6 -SE 4.3 full module - 3D CAD - MCADID0004925_2D-left (dxf)
Harmony STM6 -SE 4.3 full module - 3D CAD - MCADID0004925_2D-top (dxf)
Harmony STM6 -SE 4.3 full module - 3D CAD - MCADID0004925_2D-back (dxf)
Harmony STM6 -SE 4.3 full module - 3D CAD - MCADID0004925_2D-isometric (dxf)
Harmony STM6 -SE 4.3 full module - 3D CAD - MCADID0004925_2D-left (dwg)
Harmony STM6 -SE 4.3 full module - 3D CAD - MCADID0004925_3D-simplified (stp)
Harmony STM6 -SE 4.3 full module - 3D CAD - MCADID0004925_2D-front (dxf)
CAD
Harmony STM6 -SE 4.3 full module - 3D CAD - MCADID0004925_2D-isometric (dwg)Harmony STM6 -SE 4.3 full module - 3D CAD - MCADID0004925_2D-bottom (dxf)
Harmony STM6 -SE 4.3 full module - 3D CAD - MCADID0004925_2D-bottom (dwg)
Harmony STM6 -SE 4.3 full module - 3D CAD - MCADID0004925_2D-right (dwg)
Harmony STM6 -SE 4.3 full module - 3D CAD - MCADID0004925_2D-right (dxf)
Harmony STM6 -SE 4.3 full module - 3D CAD - MCADID0004925_2D-top (dwg)
Harmony STM6 -SE 4.3 full module - 3D CAD - MCADID0004925_2D-back (dwg)
Harmony STM6 -SE 4.3 full module - 3D CAD - MCADID0004925_2D-front (dwg)
Harmony STM6 -SE 4.3 full module - 3D CAD - MCADID0004925_2D-left (dxf)
Harmony STM6 -SE 4.3 full module - 3D CAD - MCADID0004925_2D-top (dxf)
Harmony STM6 -SE 4.3 full module - 3D CAD - MCADID0004925_2D-back (dxf)
Harmony STM6 -SE 4.3 full module - 3D CAD - MCADID0004925_2D-isometric (dxf)
Harmony STM6 -SE 4.3 full module - 3D CAD - MCADID0004925_2D-left (dwg)
Harmony STM6 -SE 4.3 full module - 3D CAD - MCADID0004925_3D-simplified (stp)
Harmony STM6 -SE 4.3 full module - 3D CAD - MCADID0004925_2D-front (dxf)