Product Description
- The Leviton Dimming Smart Sensor is designed for use with 0-10V ballasts. Lighting levels can be adjusted using the dimming bar next to the switch. The ODD10-IDx uses Passive Infrared (PIR) detection technology to monitor a room for occupancy using a segmented, tamper resistant lens. When a person passes in or out of a sensor zone, the sensor detects motion and switches the lights ON. The lights will remain ON as long as an occupant moves through the sensor zones and after the timeout expires. The ODD10-IDx features a vacancy mode for Manual- ON/Auto-OFF operation, ideal for installations where manual-ON switching is required for energy code applications. Configuration of the ODD10-IDx is made using the Leviton Smart Sensor App on a smartphone or other Bluetooth-enabled Android or iOS device. Simple configuration can also be applied using pushbutton setup for several common pre-configured options. The ODD10-IDx integrates a photocell for daylighting hold-OFF which can be programmed using the Leviton Smart Sensor App. Ideal for non-residential and commercial spaces up to 1,100 SF including offices, meeting rooms, and lobbies. Do you have a question about an occupancy sensor or vacancy sensor? Contact us to learn more.
- Can be used to comply with IECC, ASHRAE 90.1, and 2019 Title 24, Part 6 occupancy/vacancy sensing and dimming requirements
- Fits in a standard wallbox and gangable with other units
- ODD24-IDW is designed for use with a power pack (OPP20 or OSA20) or other Leviton low voltage (24V) source
- 180° field-of-view provides approximately 1,100 square feet of coverage
- Maximum sensing distance in front of the sensor is 30-40 feet and 15-20 feet on either side
- Advanced configuration can be performed using the Leviton Smart Sensor App on any Bluetooth enabled Android or iOS device: Set operating mode to Auto-ON/Auto-OFF or Manual-ON/Auto-OFF
- Adjust the sensitivity of the sensor to increase or decrease coverage area
- Adjust timeouts
- Activate the nightlight and select nightlight colors
- Add daylighting hold-off and select target daylighting hold-off levels
- Set a security code to lock configuration settings
- Configure dimming options such as Partial-0N, Partial-OFF, and Partial-OFF timeouts
- Out-of-the-box configuration default mode:
- Auto-ON/auto-OFF with 10-minute time out
- Sensitivity set to 75%
- Nightlight and daylighting hold-off disabled
Color Variations
- Ivory
- White
- Country of Origin: China
Product Features
- Application: Offices, Lobbies, Small Meeting Rooms
- Color: White
- Feature: App configurable
- Grade: Commercial
- Mounting: Wall Switch
- Product Line: ODD10
- Sensor Technology: Passive Infrared (PIR)
- Sensor Type: Occupancy / Vacancy
Performance Specifications
- Coverage (Sq.Ft.): 1100
- Pattern: 180°
Electrical Specifications
- Frequency: 50/60Hz
- Input Current: 120V: Standby: 0.2W Max: 0.5W+Load Current - 277V: Standby: 0.3W Max: 0.6W+Load Current
- Load Rating: General Purpose @ 120V: 10A - General Purpose @ 277V: 10A - LED/Electronic Ballast @ 120V: 8A, - LED/Electronic Ballast @ 277V: 5A - Standard Ballast @ 120V: 10A - Standard Ballast @ 277V: 10A - Tungsten @ 120V: 6.67A - Tungsten @ 277V: 6.67A - Motor @ 120V: 1/4HP (FLA 5.8A) - Motor @ 277V: 1/3HP (FLA 3.0A)
- Neutral Wire Connection: Required
- Voltage: 120-277 VAC
Mechanical Specifications
- IP Rating: IP10
- Mounting Type: Wall Switch
- Size: Height 4.13" (104.9mm), Width 2.12" (53.95mm), Depth 1.86" (47.25mm), Install Depth 1.42" (36.22mm)
- Switch Type: Single-Pole
Standards and Certifications
- Listings: IECC, UL and cUL listed, FCC, ICC
- Testing and Code Compliance: Can be used to comply with ASHRAE 90.1, IECC and Title 24, Part 6 occupancy/vacancy sensing and dimming requirements
Environmental Specifications
- Operating Temperature: 0°C to 40°C
- Storage Temperature Range: -40° to 185°F (-40° to 85°C)
Type
- Product Type: Smart Sensor with Dimming
Warranty
- Warranty: 5-Year Limited
Occupancy_Sensor_Smart_Sensor_PIR_Passive_Infrared_Sensor_0-10V_Dimmer_Switch_ODD10-IDx_LES-G-10402E.pdf
DI-000-ODD10-02B-W_-_Installation_-_ODD10_Smart_Sensors_-_English.pdf
DI-000-ODD10-52B-W_-_Installation_-_ODD10_Smart_Sensors_-_French.pdf
LES-G-10428B_Smart_Wallbox_Sensor_wPlug_Load_Control_Solution_Sheet_-_REV_AUG_2022.pdf
User Guide/Manual
LES-G-10553_Smart_Sensor_App_Quick_Start_Guide.pdfBrochure
G-7164N_Sensor_Product_Guide_-_REV_MAR_2022.pdfInstruction Sheet
DI-000-ODD10-42B-W_-_Installation_-_ODD10_Smart_Sensors_-_Spanish.pdfDI-000-ODD10-02B-W_-_Installation_-_ODD10_Smart_Sensors_-_English.pdf
DI-000-ODD10-52B-W_-_Installation_-_ODD10_Smart_Sensors_-_French.pdf
White Papers
Technical_Article_-_Smart_Wallbox_Sensor_Firmware_Update_P2P_Process_-_REV_OCT_2021.pdfSolution Sheets
Solution_Sheet_-_Smart_Wallbox_Sensor.pdfLES-G-10428B_Smart_Wallbox_Sensor_wPlug_Load_Control_Solution_Sheet_-_REV_AUG_2022.pdf