Product Description
- Range Compatibility: PacDrive 3
- Product Or Component Type: servo motor
- Device Short Name: SH3.....P
Contractual warranty
- Warranty: 18 months
Complementary
- Circle Diameter Of The Mounting Holes: 82 mm
- Peak Stall Torque: 3.5 N.m 115...480 V three phase
- Number Of Mounting Holes: 4
- Continuous Power: 690 W
- Shaft Diameter: 11 mm
- Key Width: 4 mm
- Nominal Output Power: 220 W 115 V single phase || 440 W 230 V single phase || 820 W 400 V three phase || 950 W 480 V three phase
- Maximum Mechanical Speed: 8000 rpm
- Mounting Holes Diameter: 5.5 mm
- Type Of Cooling: natural convection
- Holding Torque: 2 N.m
- Maximum Radial Force Fr: 660 N 1000 rpm || 520 N 2000 rpm || 460 N 3000 rpm || 410 N 4000 rpm || 380 N 5000 rpm || 360 N 6000 rpm
- Encoder Type: absolute multiturn SinCos Hiperface
- Mounting Support: international standard flange
- Rotor Inertia: 0.322 kg.cm²
- Number Of Motor Poles: 3
- Back Emf Constant: 46 V/krpm 20 °C
- Maximum Axial Force Fa: 80 N
- Ip Degree Of Protection: motor IP65 EN/IEC 60034-5 || shaft bushing IP65 EN/IEC 60034-5
- Shaft End: parallel key
- Centring Collar Depth: 2.5 mm
- Nominal Speed: 1500 rpm 115 V single phase || 3000 rpm 230 V single phase || 6000 rpm 400 V three phase || 7200 rpm 480 V three phase
- Electrical Connection: straight connector
- Holding Brake: with
- Speed Feedback Resolution: 128 periods
- Stator Resistance: 10.4 Ohm
- Continuous Stall Current: 1.8 A
- Nominal Torque: 1.4 N.m 115 V single phase || 1.4 N.m 230 V single phase || 1.1 N.m 400 V three phase || 1.1 N.m 480 V three phase
- Shaft Length: 23 mm
- Phase: three phase
- Length: 179.5 mm
- Net Weight: 2.3 kg
- Maximum Current Irms: 5.7 A
- Torque Constant: 0.69 N.m/A 120 °C
- Centring Collar Diameter: 60 mm
- Continuous Stall Torque: 1.25 N.m 115...480 V three phase
- Stator Inductance: 60.25 mH
- Motor Flange Size: 70 mm
- [Us] Rated Supply Voltage: 115...480 V
Offer Sustainability
- China Rohs Regulation: X
- Rohs Exemption Information: Yes
- Mercury Free: Yes
- Environmental Disclosure: ENVPEP111049EN
- Sustainable Offer Status: Green Premium product
- Pvc Free: Yes
- Eu Rohs Directive: Pro-active compliance (Product out of EU RoHS legal scope)
- Reach Regulation: Reference contains Substances of Very High Concern above the threshold
- California Proposition 65: WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Weee: The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Spec Sheet
Servomotor SH3 070 1,4Nm,key,brake,90°conn - 3D CAD - MCADID0001405_2D-top (dxf)
Servomotor SH3 070 1,4Nm,key,brake,90°conn - 3D CAD - MCADID0001405_2D-right (dxf)
Servomotor SH3 070 1,4Nm,key,brake,90°conn - 3D CAD - MCADID0001405_2D-left (dwg)
Servomotor SH3 070 1,4Nm,key,brake,90°conn - 3D CAD - MCADID0001405_2D-bottom (dxf)
Servomotor SH3 070 1,4Nm,key,brake,90°conn - 3D CAD - MCADID0001405_2D-right (dwg)
Servomotor SH3 070 1,4Nm,key,brake,90°conn - 3D CAD - MCADID0001405_2D-front (dwg)
Servomotor SH3 070 1,4Nm,key,brake,90°conn - 3D CAD - MCADID0001405_2D-bottom (dwg)
Servomotor SH3 070 1,4Nm,key,brake,90°conn - 3D CAD - MCADID0001405_2D-top (dwg)
Servomotor SH3 070 1,4Nm,key,brake,90°conn - 3D CAD - MCADID0001405_2D-isometric (dxf)
Servomotor SH3 070 1,4Nm,key,brake,90°conn - 3D CAD - MCADID0001405_3D-simplified (stp)
Servomotor SH3 070 1,4Nm,key,brake,90°conn - 3D CAD - MCADID0001405_2D-isometric (dwg)
Servomotor SH3 070 1,4Nm,key,brake,90°conn - 3D CAD - MCADID0001405 (pdf)
Servomotor SH3 070 1,4Nm,key,brake,90°conn - 3D CAD - MCADID0001405_2D-back (dwg)
Servomotor SH3 070 1,4Nm,key,brake,90°conn - 3D CAD - MCADID0001405_2D-back (dxf)
Servomotor SH3 070 1,4Nm,key,brake,90°conn - 3D CAD - MCADID0001405_2D-left (dxf)
Lexium SH3, Declaration of Conformity, EU CE, Schneider Electric - 1000000154.08_DeclarationOfConformity_SH3-Series_signed (pdf)
User guide
Lexium 52, Hardware Guide - EIO0000001347.05 (pdf)CAD
Servomotor SH3 070 1,4Nm,key,brake,90°conn - 3D CAD - MCADID0001405_2D-front (dxf)Servomotor SH3 070 1,4Nm,key,brake,90°conn - 3D CAD - MCADID0001405_2D-top (dxf)
Servomotor SH3 070 1,4Nm,key,brake,90°conn - 3D CAD - MCADID0001405_2D-right (dxf)
Servomotor SH3 070 1,4Nm,key,brake,90°conn - 3D CAD - MCADID0001405_2D-left (dwg)
Servomotor SH3 070 1,4Nm,key,brake,90°conn - 3D CAD - MCADID0001405_2D-bottom (dxf)
Servomotor SH3 070 1,4Nm,key,brake,90°conn - 3D CAD - MCADID0001405_2D-right (dwg)
Servomotor SH3 070 1,4Nm,key,brake,90°conn - 3D CAD - MCADID0001405_2D-front (dwg)
Servomotor SH3 070 1,4Nm,key,brake,90°conn - 3D CAD - MCADID0001405_2D-bottom (dwg)
Servomotor SH3 070 1,4Nm,key,brake,90°conn - 3D CAD - MCADID0001405_2D-top (dwg)
Servomotor SH3 070 1,4Nm,key,brake,90°conn - 3D CAD - MCADID0001405_2D-isometric (dxf)
Servomotor SH3 070 1,4Nm,key,brake,90°conn - 3D CAD - MCADID0001405_3D-simplified (stp)
Servomotor SH3 070 1,4Nm,key,brake,90°conn - 3D CAD - MCADID0001405_2D-isometric (dwg)
Servomotor SH3 070 1,4Nm,key,brake,90°conn - 3D CAD - MCADID0001405 (pdf)
Servomotor SH3 070 1,4Nm,key,brake,90°conn - 3D CAD - MCADID0001405_2D-back (dwg)
Servomotor SH3 070 1,4Nm,key,brake,90°conn - 3D CAD - MCADID0001405_2D-back (dxf)
Servomotor SH3 070 1,4Nm,key,brake,90°conn - 3D CAD - MCADID0001405_2D-left (dxf)
Declaration of conformity
Lexium SH3, Declaration of Conformity, RCM, Schneider Electric - ACMA_SDoC_Lexium_SH3_OMC_signed (pdf)Lexium SH3, Declaration of Conformity, EU CE, Schneider Electric - 1000000154.08_DeclarationOfConformity_SH3-Series_signed (pdf)